BAT100 SERIES OVERVIEW
UNICO’s R&D Cell Tester is a ultra-high performance cell testing solution in an incredibly small package. It leads the industry with the highest energy density in the smallest footprint with up to (64) 300A channels in a single system. Built-in advanced features on each channel like EIS, DCIR, self-calibration, and waveform capture allows you to perform all your R&D testing without additional devices, saving significant space in your lab. If high performance testing with built-in advance functionality and a small footprint is your need, this is the solution.
Highest Performance, Smallest Footprint 75% Smaller Than Comparable Systems
Modular Cell Test System
Cell Test Platform You Can Grow With
Key Features
- Modular Design
- Regenerative
- 90% Efficiency at 300A load
- Built-In Automation
- Open API for 3rd Party Automation
- Cybersecurity Package
- Built-in 4 Temperature Measurement per Channel*
- Parallel and Series Operation
- Built-in Oscilloscope Feature per Channel*
- 9 Built-in EIS per Channel*
- Built-in DCIR
- Built-in Self-Calibration
- Built-in extra Analog in per Channel
- Built-in extra Analog out per Channel
For Higher Current Tests, Channels Can Be Used in Parallel
| Parameter | Low | High |
|---|---|---|
| Voltage Range | 10VDC | 10VDC |
| Current Range | 12.5A | 300A |
| Power Per Channel | 100W | 2000W |
| Channels Per Device | 64 | 8 |
| Channels Per Cabinet | 512 | 64 |
 |
 |
Available Current Ranges
| Parameter | Low | High |
|---|---|---|
| Voltage Range | 10VDC | 10VDC |
| Current Range | 12.5A | 300A |
| Power Per Channel | 100W | 2000W |
| Channels Per Device | 64 | 8 |
| Channels Per Cabinet | 512 | 64 |
|
|
300A Channel Example
Three Performance and Feature Levels Available - Upgrade Anytime
| Description | Basic | Standard | Premium |
|---|---|---|---|
| Max. Voltage Per Channel | 10V | 10V | 10V |
| Voltage Accuracy | 1mV | 1mV | 1mV |
| Current Accuracy | 0.05% FS 300mA |
0.03% FS 180mA |
0.01% FS 60mA |
| Voltage Resolution | 150μV | 150μV | 150μV |
| Current Resolution | 4.5mA | 4.5mA | 4.5mA |
| EtherCAT | Yes | Yes | Yes |
| Ether Net | Yes | Yes | Yes |
| Cards Parallelization | Yes* | Yes* | Yes* |
| CC,CV, CP Modes | Yes | Yes | Yes |
| Remote Voltage Sense | Yes | Yes | Yes |
| Dynamic Profiles Mode | Yes | Yes | Yes |
| Analog IN Per Device | 4 | 4 | 8 |
| Analog OUT Per Device | - | 4 | 8 |
| Thermocouple Per Device | - | 4 | 8 |
| Thermistors Per Device | - | 16 | 32 |
| RS485 (Full Duplex) Per Device | - | 4 | 8 |
| Relay Outputs Per Device | 8 | 8 | 8 |
| Graphical User Interface and open API | Yes | Yes | Yes |
| Snapshot/Oscilloscope Per Channel | Yes | Yes | Yes |
| Cyber Security Package | No | No | Yes |
| Self-Calibration Per Channel | No | No | Yes |
| DCIR Capability | No | No | Yes |
| EIS Capability (Available Q4/2024) | No | No | Yes |
Basic
Standard
All Basic features plus:
- Voltage and current accuracy improved to 0.03%, with thermal compensation.
- Minimum output voltage reduced to 650mV
- RS485 interface
Premium
All Standards features plus:
- Voltage and current accuracy improved to 0.01%, with manual calibration (not self-calibration).
- Minimum output voltage reduced to 250mV
- Snapshot (Oscilloscope feature) per channel included
- Built-in self-calibration, increasing the lifetime of the accuracy
- Cybersecurity
Detailed Specifications
Static Performance
Maximum Number of Channels Per Rack
Large Cabinet 64
Small Cabinet
64
32
Number of Possible Parallel Channels
(parallel only possible with channels on same device)
8
Serial Mode
Up to 30V
Operation Modes
CC, CV, CP
Max. Power per channel
1800 W
Current range
300A
Voltage range
10 V
Efficiency
90%
Measurement
Basic
Standard
Premium
Current
Resolution
Accuracy
4mA
4mA
4mA
300mA
180mA
60mA
Voltage
Resolution
Accuracy
150μV
150μV
150μV
1mV
1mV
1mV
Temperature
Accuracy
0.1°C
0.1°C
0.1°C
Data acquisition
EtherCAT
up to 1kHz
Waveform Measurement (Oscilloscope Function)
Waveform Bandwidth
up to 1MHz
Measurement
Voltage & Current
Digitizing Rate Range
10K – 1M Sample/Sec
Default Digitizing Rate
100 K/Sample/Sec
Memory
8192 samples
Safety
Current Rise/Fall Time (10-90%)
< 1.8msec
Time from Minus to Maximum Current
< 2.0msec
Ripple
< 25mV
Safety
Isolation AC Input
3.8 kV AC Input to Chassis / 3.8 kV AC to DC Output
Isolation UUT Input
600V Channel to Channel, 2.5kV Channel to Chassis
Safety Interlocks
Emergency Stop, External User Input
Internal Protection
Over- Current (OC) Under-Voltage (UV) Over-Voltage (OV) OverPower (OP) Over-Temperature
Programmable Safety
Over/Under- Current (OC/UC) Over/Under-Voltage (OV/UV)
Over/Under-Power (OP/UP) Over-Temperature
Mechanical Specifications
Rack Size (WxDxH)
Full Rack
Large Cabinet
Small Cabinate
332 x 48 x 87" / 2200 x 800 x 1200 mm
32 x 48 x 55” / 1400 x 800 x 1200 mm
Rack Weight
Large Cabinate
Small Cabinate
3086 lbs / 1400 kg per full rack
1763 lbs / 800 kg per full rack
Rack Weight
Cooling Method
Operating Noise
< 60dB
Other Products
Corporate Headquarters
- Unico
- 3725 Nicholson Rd.
- P. O. Box 0505
- Franksville, WI 53126-0505
- 262.886.5678
Join Our Team
- Drop in your resume at –
- hr@wodehousecapital.com
- + 91 22 66336600
Contact Unico Support
Reach us for any enquiry
Disclaimer
Please see our Privacy Policy which outlines the types of information we collect and how we use it, and that we will respect your wish to opt-out of our communications at any time.
Corporate Headquarters
- Unico
- 3725 Nicholson Rd.
- P. O. Box 0505
- Franksville, WI 53126-0505
- 262.886.5678
Join Our Team
- Drop in your resume at –
- hr@wodehousecapital.com
- + 91 22 66336600
Talk to our Sales Team
Our sales professionals are eagerly awaiting your questions. Fill out the form below and we’ll be in touch. If you’re looking for product support click here
Disclaimer
Please see our Privacy Policy which outlines the types of information we collect and how we use it, and that we will respect your wish to opt-out of our communications at any time.