EV Battery cyclers for charge, discharge and lifecycle testing of EV battery packs and modules. High voltages and currents for electric vehicle testing.
EV Battery simulators / emulators for testing electric vehicle propulsion and powertrain systems, including traction inverters, E-motors and E-axles.
Unico provides modular testing solutions with its Universal Inverter to test E-motors in EV applications. Find out more about this solution
E-Motor emulators for testing electric vehicle traction inverters. Validate and test different inverter designs to prevent prototype e-motor failure.
Unico’s E-Motor Dynamometer Drive system has a unique design that allows the drive to operate any AC motor without the current-loop setup required by conventional drives.
Unico’s E-Drive Dynamometer Drive system provides internal inertia simulation, that simulates both fixed and dynamic inertias using internal models or external commands.
Unico’s E-Axle Dynamometer Drive system has a torque estimator that eliminates the need for expensive and mechanically complicated torque-measuring devices.
Unico’s Hybrid Electric Dynamometer Drive system smoothly switches from speed mode to torque mode and back using controlled transitions and programmable ramp rates.
Unico’s E-Drive Dynamometer Drive system has full regeneration to the three-phase power grid. The drive can be configured for ultra-quiet operation required for NVH testing.
Unico’s E-Motor Dynamometer Drive system is a proven platform installed throughout the world for durability, validation and high-performance engine testing applications.
Unico’s Transmission Dynamometer Drive system simulates the real-time torque pulses produced by internal combustion engines. Scalable design for complete 4WD test rigs.
The FTS™ software module from Unico provides automated feeding control for roll-feed applications which enables users to take full advantage of the machine.
Unico provides Flying Cut-off control used for flying cutoff die accelerator drive system with the best-in-class flexibility and reliability required for coil processing applications.
The Unico Loop/Leveler Control systems for coil processing applications are developed for the optimal control of the leveler and straightener in order to explicitly handle important control specifications.
Unico provides Metal Rotary Cut-off specifically for controlling rotary-cutoff applications with the best-in-class flexibility and reliability required for the metal industry.
Unico provides Position/Indexer Control PIC™ software specifically for controlling linear- or rotary-indexer applications with the best-in-class flexibility and reliability.
Press / Shear Control PSC™ software from Unico allows swift control of press and shear applications in the metal industry. It comes with best-in-class flexibility and reliability.
The Unico Uncoiler / Recoiler with Tension Control URC™ software module provides superior control of unwinding and rewind applications in the metal industry.
The Unico Embedded Profile Control system is a scalable motion control system designed specifically for metal forming applications. It provides coordinated motion control for up to 20 drives in as many as 20 independent axes in its standard configuration.
The standard STF® system provides coordinated motion control for as many as 16 drives in four independent axes, while custom systems can control a virtually unlimited number of drives and axes. The servo system provides electronic line shafting that eliminates the large gearboxes...
Unico SRP drive is the most reliable, easy-to-use, and sophisticated control system for artificial lifts with remote monitoring capabilities.
ESP pump drives manufactured by Unico are the best solution for oil and gas automation with a methodical, efficient, and coherent approach.
Unico’s progressive pumps and controls can control the torque of the motor and rotary positive displacement downhole pump in a very efficient manner.
Unico RPC Rod Pump Controller provides economic pump-off control of sucker-rod pumping systems.
Well Analytics System by Unico is an efficient, cost-effective way for oil and gas producers to stay connected to the most critical aspects of daily operations.
The GMC® system continuously collects data from an unlimited number of wells and fields and makes that data accessible from virtually anywhere at any time over the Web.
A sophisticated subscription service alerts users when specific conditions are detected. Notifications can be triggered, for example, whenever a fault occurs, when specific...
Comprehensive well reports can be generated automatically or on demand. SRP reports include both surface and downhole dynamometer graphs. Users can simultaneously compare...
The double facer/baker control drive from Unico improves the production process of paper conversion while providing complete safety from wear with advanced controls and diagnostics.
For an economical and highly effective choice for your paper converting needs, look no further than the Unico Pull Roll Control drive.
Controlling the rotary cut-off during production has become much easier with the Unico smart and easy rotary cut-off control.
The single facer control drive from Unico provides the best control options for paper converting applications. It can help users to automate and optimize the manufacturing process.
Along with multiple manual and automatic modes, the Unico slitter scorer control drive is equipped with the latest technology to perform every task with more efficiency.
Unico’s Smart Web AOC Shear Drive can be used alone or as part of a multidrive corrugator dry-end system. The drive controls the shear during the automatic-order change (AOC) sequence and scrap chop-out
Get the control at your fingertips with Unico smart and automatic feed to register control drive and become a paper converting industry expert.
The Unico rotary die clutter control drive equipped with modern tech makes your paper converting methods easier, fast, reliable, and more flexible.
The Unico Rotary Printer Control drive can help you make your paper converting process more explicit, manageable, fast, and firm with advanced software control and digital technology.
Unico’s high-performance sheeter control systems provide comprehensive solutions at low cost and more flexibility. Our sheeter control yields optimal cut accuracy, throughput, and energy savings with paper and board applications.