[File]
	DescText = "Unico S2000";
	CreateDate = 01-25-2001;
	CreateTime = 09:20:13;
	ModDate = 01-27-2003;
	ModTime = 15:46:13;
	Revision = 3.1;

[Device]
	VendCode = 30;				
	VendName = "Unico, Inc.";	
	ProdType = 12;            
	ProdTypeStr = "Communications Adapter";
	ProdCode = 2;
	MajRev = 1;
	MinRev = 4;
	ProdName = "Unico s2000";
	Catalog = "320670";
	Icon = "Unico_s2000.ico";

[Device Classification]
	Class1 = 1_RSNetWorx_Adapter;
	Class2 = ControlNet;

[Port]
   Port2 = ControlNet_Redundant,
         "Port A",
         "20 F0 24 01",2;

[Params]
        Param2 = 0,		$ Shall be zero
                 ,,             $ no path, not accessible from network
                 0x0000,        $ Descriptor
                 2,2,           $ Data type and size (in bytes)
                 "Input Size",  $ Parameter name    
                 "Bytes",       $ Units string
                 "This is where you set the input data size. Input means from device -> controller",  $ Help string
                 4,132,8,       $ Min, Max, Default  This size is +4 bytes for overhead
                 ,,,,,,,,;

        Param3 = 0,		$ Shall be zero
                 ,,             $ no path, not accessible from network
                 0x0000,        $ Descriptor
                 2,2,           $ Data type and size (in bytes)
                 "Output Size", $ Parameter name     
                 "Bytes",       $ Units string
                 "This is where you set the output data size. Output means from controller -> device",  $ Help string
                 0,128,4,        $ Min, Max, Default  (This is not +4 bytes)
                 ,,,,,,,,;

[Connection Manager] 
	Connection1 =
		0x04010002,		$ trigger & transport 
						$	0-15	= supported transport classes (class 1)
						$	16	= cyclic (1 = supported)
						$	17	= change of state (0 = not supported)
						$	18	= on demand (0 = not supported)
						$	19-23	= reserved (must be zero)
						$	24-27	= input only
						$	28-30	= reserved (must be zero)
						$	31	= client 0 (don't care for classes 0 and 1)
		0x44240405,		$ point/multicast & priority & realtime format
						$	0	= O=>T fixed (1 = supported)
						$	1	= O=>T variable (0 = not supported)
						$	2	= T=>O fixed (1 = supported)
						$	3	= T=>O variable (0 = not supported)
						$	4-7	= reserved (must be zero)
						$	8-11	= O=>T header (heartbeat)
						$	12-15	= T=>O header  (32 bit run/idle)
						$	16-19	= O=>T point-to-point
						$	20-23	= T=>O multicast
						$	24-27	= O=>T scheduled
						$	28-31	= T=>O scheduled
		,Param3,,               $ O=>T RPI,Size,Format
		,Param2,,	        $ T=>O RPI,Size,Format
		,,                      $ config part 1 (not used)
		,,                      $ config part 2 (not used)
		"Read/Write words",     $ connection name
		"",                     $ Help string
		"20 04 24 01 2C 01 2C 02";      $ read/write path

		1_PLC5C_RTD_Format1 = 1_PLC5C_1794_Discrete_RTD_Format;